The attachments are the different parts that one can find against the ‘Rear ceiling’. Which are composed of panels and shutters.

For the F/O side, we can distinguish :

• Speaker;
• Panel, Circuit breakers, lighting;
• Section ‘Emergency escape rope’;
• ‘Air vent’ grill;
• Liège ‘Spare Bulbs’.

The dimensions are according to ‘estimate’ happened and this, after studying various photos and drawings.

They are made out of PVC Foam board and MDF.

Most of the attachments are ‘dummies’ and serve only for the view.

More info : http://www.flightdeck737.be/hardware/platform/ceiling/rear-ceiling/

A difficult part in the construction of the cockpit is the path of the films of the ‘Rear Ceiling’ or the rear part of the cockpitdak.

It is a collection of bows, pleats and angles that are correct and that everything is in one piece.

After some trials and errors in the carton is the final part made from aluminium of 1 mm thick.

The explanation of the ‘Rear Ceiling’ is to be found on the following page : http://www.flightdeck737.be/hardware/platform/ceiling/rear-ceiling/

The intercom is a collection of pre – and power amps that are all built into a plastic (bakelite) receptacle.

This container will later be placed at the bottom of the pedestal (Aft Electronic Panel).

When the radio modules of the pedestal will have an additional VHF-panel will be built with 2 potentiometers (volume control Capt and F/O) that are connected on the receptacle with a 5-pin plug.

On the outside of the receptacle, there are connections provided for various connections :

• Power supply 12V (PC power supply);
• Headset/Speakers Capt;
• Headset/Mike Capt;
• Headset/Speakers F/O;
• Headset/Mike F/O;
• PC Speakers;
• PC Mike;
• Connection 5-pin plug.

Further info is to be found on the following page : http://www.flightdeck737.be/hardware/avionics-pedestal/intercom/